Browse Source

Initial init

Added readme and meshBed customisation
James Mackay 11 months ago
commit
1c93358421
2 changed files with 65 additions and 0 deletions
  1. 1 0
      README.md
  2. 64 0
      meshBed.cfg

+ 1 - 0
README.md

@@ -0,0 +1 @@
+Just a place to store all my customisations for Klipper. 

+ 64 - 0
meshBed.cfg

@@ -0,0 +1,64 @@
+##Make sure to add in the [meshbed] option to your printer.cfg. See the below link for details
+##https://blog.notexpectedyet.com/manual-mesh-levelling-with-klipper/
+
+##Replace default menu__prepare and activate the meshBed menu item. 
+[menu __prepare]
+type: list
+enable: !toolhead.is_printing
+name: Prepare
+items:
+##     .__delta_calib - "Removed due to not using, remove comments and this to re-enable"
+##     .__bedprobe - "Removed due to not using, remove comments and this to re-enable"
+     .__hotend_pid_tuning
+     .__hotbed_pid_tuning
+     .__host_restart
+     .__firmware_restart
+     .meshBed
+
+## Add in menu "Mesh Bed Level" to Klipper Prepare option. 
+[menu __prepare meshBed]
+type: list
+enable: !toolhead.is_printing
+name: Mesh Bed Level
+items:
+    .start
+    .zposition
+    .zNudgeDown
+    .zNudgeUp
+    .next
+    .save
+
+[menu __prepare meshBed zposition]
+type: item
+name: "Z Pos= {0:05.3f}"
+parameter: toolhead.zpos
+	
+[menu __prepare meshBed start]
+type: command
+name: Start Callibration
+gcode: 
+	G28
+	BED_MESH_CALIBRATE
+	TESTZ Z=-5
+
+[menu __prepare meshBed zNudgeDown]
+type: command
+name: Nudge Down
+gcode: TESTZ Z=-0.025
+
+[menu __prepare meshBed zNudgeUp]
+type: command
+name: Nudge Up
+gcode: TESTZ Z=0.025
+
+[menu __prepare meshBed next]
+type: command
+name: Next
+gcode: 
+	ACCEPT
+	TESTZ Z=-5
+	
+[menu __prepare meshBed save]
+type: command
+name: Save & Restart
+gcode: SAVE_CONFIG