`_start_protocol_pairing` called androidtvremote2's cert generation and
`async_start_pairing` with no try/except, so `CannotConnect` propagated straight
out of `async_step_protocol_pair`. The caller already had the shape for a soft
failure — `_async_begin_protocol_pairing()` returns `(client, None) | (None,
error)` and `_async_restart_protocol_pairing` renders `errors["base"]` — the
exception simply bypassed it, and the protocol_pair form never appeared: not the
address field, not the "continue without pairing" escape.
That made it a default-path crash rather than an edge case: t41 turned the
protocol transport ON by default, so an asleep, rebooting or mis-addressed Shield
(whenever someone adds the integration, or skips ADB pairing into this step)
raised out of the flow instead of showing the form. The reviewer reproduced both
under real HA.
Now the step returns `(None, "protocol_unreachable")`, logs the address and the
library error, discards the half-built client so a retry starts clean, and renders
the same form the other failures render — with the address editable and the skip
option intact. `protocol_unreachable` is documented in strings.json AND
translations/en.json (a form error without copy shows a bare key in the UI).
Tests (tests/test_config_flow_ux.py::TestUnreachableShieldDuringPairing): the fake
client can now fail to start pairing, and five cases cover fresh setup, the
ADB-skip route into the protocol step, reconfigure, reauth and the skip path that
still finishes the entry — all as FORMS, never exceptions. Red proof on HEAD:
the same drive raises CannotConnectStubError out of async_step_user.
Verified: 361 passed / 2 skipped, 362 / 1 with androidtvremote2, ruff clean.
The two address fields were the same Shield spelled twice, and every bug in the
zeroconf/IP-change path came from keeping them in sync. One field now:
* const.CONF_HOST replaces CONF_ADB_HOST / CONF_PROTOCOL_HOST in the setup form,
the options page, the pairing forms, the reconfigure/reauth seeding and the
description copy. ADB port 5555 stays the only port field;
* helpers.entry_host(entry) is the single resolver (options first, then data);
resolve_adb_config and the protocol settings both go through it, so both
transports read the same value at call time (the t32 F1 factory re-read keeps
working: the NEXT built poller sees the new address);
* helpers.seed_host / seed_adb_enabled own the YAML seed's shape rule. A block
may use `host` or the legacy protocol_host/adb_host keys — t41 keeps the old
spelling working — and t32 F4's outcome is unchanged: a protocol-only block
leaves ADB off, an address (or an explicit adb_enabled) turns it on;
* the zeroconf IP-change path collapses the t21-F2 per-host dance into one rule:
the discovery address IS the entry's address, so the entry is updated when it
differs and left alone when it matches. The blank-self-heal and
deliberately-different-ADB-host cases are gone with the duplication — a
second address field cannot express them anymore, and the tests now pin that
(previously "an explicit override is never clobbered");
* the options page exposes the protocol toggle it never had (the page could turn
ADB off but not the protocol);
* button.py (granted to this task) reads the entry's own address instead of
another integration's entity.
The v3 entry migration that maps existing adb_host/protocol_host onto CONF_HOST
and drops the androidtv key lands in the next commit; HA runs migrations before
setup, so an existing entry is never read with the old shape.
Verified: 311 passed / 2 skipped, 312 / 1 with androidtvremote2, ruff clean,
drift engine exit 0 on HEAD. The UI-copy contract tests (every rendered field
has a label in strings.json AND translations/en.json, key trees identical, host
errors name the field) drove the string edits.
"Continue without protocol pairing" switched the transport off for good: the
options flow carries no protocol fields, so nothing in the UI could ever turn
it back on, and the skip copy promised nothing about it (t34 F1). The entry now
answers Home Assistant's Reconfigure action:
* async_step_reconfigure (audit G5) seeds the flow from the entry (title, adb
host/port/enabled, androidtv entity for the host fallback) and re-runs the
pairing step — the address is editable, the Shield shows a PIN, and
_finish_reconfigure persists protocol_enabled=True plus the address that just
paired (so the transport no longer depends on the ADB fallback), adopts the
paired MAC when it differs, and updates + reloads the entry. HA derives the
"reconfigure_successful" abort from the flow source. A Reconfigure visit that
clicks skip aborts honestly with "reconfigure_skipped" (entry untouched), and
an entry that is gone aborts with "reconfigure_entry_missing".
* the skip data_description now states the truth — the transport stays off
until you pair it — and names the later path (the integration's entry menu >
Reconfigure).
* a host corrected on the pairing form now DROPS the session started against the
old address and restarts pairing there, so the typed address is authoritative
instead of being paired against the stale one.
* the success path no longer runs _abort_if_unique_id_configured for a flow
that already owns an entry: core looks the domain up by unique_id, so
re-pairing an entry aborted on itself as "already_configured" (this also
unblocked reauth). The fresh-setup path is unchanged.
* adjacent fix while wiring the same call: _finish_reauth passed
`options_updates`, which core's async_update_reload_and_abort does not accept
(the kwarg is `options`, REPLACE) — the reauth path would have raised
TypeError in production. Both paths now pass `options` and the test stubs
mirror the real signature.
Tests: tests/test_config_flow_ux.py::TestProtocolReconfigure drives reconfigure
from a protocol-disabled entry through to updated options (transport on, host
persisted, other options kept, MAC adopted, reload recorded), a corrected host
reopening the PIN step against the new address, the skip abort, and the
missing-entry abort; TestCopyContract gained the F1b copy pin. Against HEAD's
config_flow.py all four reconfigure tests fail (no async_step_reconfigure).
Verified: uvx --with pytest-asyncio pytest tests -q → 281 passed, 1 skipped;
uvx --with pytest-asyncio --with androidtvremote2 pytest tests -q → 282 passed;
uvx ruff check custom_components tests → clean.
Every user/pairing-step label and data_description rewritten in plain language,
and the fields the new pairing forms render now have labels at all (adb_host,
adb_port, skip_pairing, protocol_host, pairing_code).
No error string sends the user to "the previous step" any more: adb_no_host and
protocol_no_host name the field on the same form AND say a discovered Shield is
pre-filled automatically. The confirmation messages for both pairing steps
describe what the form actually does (including the restart-on-empty-submit
path), and protocol_unavailable covers a missing androidtvremote2.
The options-flow copy was audited in the same pass so it matches the setup
step's vocabulary ("Read state over ADB", "Show title and artist", ...), and
translations/en.json stays byte-identical to strings.json.
Verified: uvx --with pytest-asyncio pytest tests -q → 242 passed, 1 skipped;
uvx ruff check custom_components tests → clean.
F-A (HIGH): _user_schema_dict re-declared vol.Optional(CONF_ADB_HOST) /
CONF_PROTOCOL_HOST inside `if "host" in defaults:` — a no-op, because
voluptuous keys compare by field name and the first (defaultless) key object
survives. The discovered address therefore never reached the form, and the
user submitted a blank host. The host keys are now declared WITH default=host
(_host_field_key), so a discovery-driven user step arrives pre-filled.
F-A2: a discovery-driven user step says the address is known
("{discovery_note}Discovered Shield at <host> — its address is already filled
in below. ") through description_placeholders, and the no_state_source
re-render keeps the prefill instead of rebuilding a blank schema.
F-D: the ADB port is declared with default=DEFAULT_ADB_PORT (5555), and a YAML
seed's port hint is carried into the form instead of being flattened to 5555.
The seed host now feeds _seed_host (same prefill, no discovery claim).
Reproduce-through-test: tests/voluptuous_mirror.py mirrors the real
voluptuous.Marker key contract (hash/eq by field name, default=UNDEFINED when
omitted), because voluptuous is not installed in either CI variant and the old
bare-key stubs could not tell a schema WITH a default from one without. The
pre-t33 discovery assertion only checked the stored attribute and stayed green
while the form rendered blank; it now reads the schema keys and fails on the
pre-fix code (8 tests reproduced red locally).
Verified: uvx --with pytest-asyncio pytest tests -q → 242 passed, 1 skipped;
uvx ruff check custom_components tests → clean.
Home Assistant custom integration for NVIDIA Shield TV that composes
the Android TV Remote, Jellyfin, smart plug, and receiver entities
into a single unified media player with ADB-based now-playing from
any app. Part of the Media Zone ecosystem.
Entities:
- media_player: power (with smart plug fallback), transport, input,
volume routed to receiver, rich stream info overlay when Jellyfin
is active
- sensor: DAG attributes and stream info
- button: Pair ADB
Config:
- Two-step flow: basic setup + optional ADB pairing on the Shield
- Configurable ADB port (default 5555)
- Pick an existing Jellyfin media_player entity — stream info is read
from the HA Jellyfin integration's own DataUpdateCoordinator, so
no server URL / API key / extra config needed here
- Privacy mode (adb_store_app_info=False) suppresses non-Jellyfin
media details, showing only the app name
Ecosystem:
- Exposes media_dag_* attributes for ha-media-zone orchestration
- Exposes media_dag_running_apps and async_bring_to_foreground for
the Media Zone card's app switcher
Shared ADB code lives in ltomes/ha-adb-common and is vendored at
custom_components/nvidia_shield/ha_adb_common/ for HACS installs.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
James Mackay